EMD F9A and F9B | ||
|---|---|---|
 | ||
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
| Rev. 14 Feb. 2023/ New: 4 July 2006 | Artwork by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: Winton | Engine: 567C 16 cylinder | |
| Bore & Stroke | 8" X 10" | |
| RPM (Maximum / Minimum) | 835 / 275 | |
| Main Generator: GM - D12D | Horsepower: 1750 | |
| Gear Ratio: 62:15 | Speed: 65 mph | |
| Trucks: 4-Wheel | Configuration: B-B | |
| Traction Motor Blowers: Electrical Drive (4) | Model: GM | |
| Weight: 230,000 lbs (and 228,000 for F9B) | Traction Motors: GM - D37 (four) | |
| Tractive Effort (starting) 56,500 lbs @25% | Tractive Effort (continuous): 40,000 lbs @ 9.3 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
| Auxilary Generator: Delco A8102 | Alternator: D14 | |
| Air Brake: Westinghouse | Model: 24RL | |
| Compressor: Gardner Denver | Model: WBO | |
| Quantity Built: 87 (and 154 for F9B unit) | Dates: 1/1954 to 12/1956 (and 1/54 to 4/57 for F9B) | |
| - | - | |
| Exterior Dimensions | F9A (and F9B) | |
| Total Length | 50'-08" (and 50'-00" for F9B) | |
| Wheel Diameter | 40" | |
| Truck Wheel Base | 9'-00" | |
| Total Wheel Base | 39'-00" | |
| Height to Top Engine Hood | 14'-01.5" | |
| Height to Top Cab | 15'-00" (N/A for F9B) | |
| Cab Width | 10'-07" (N/A for F9B) | |
| Engine Hood Width | 9'-10" | |
| Center Front Truck to Front Pilot | 9'-11" (and 5'-6" for F3B both ends) | |
| Center Rear Truck to Rear Pilot | 8'-6" | |
| Distance between Truck Centers | 30'-00" | |
| Minimum Turning Radious | 30 degrees | |
| - | - | |
| Fuel Oil: 1200 | Lubricating Oil: 200 | |
| Engine Cooling Water: 230 (and 215 for F9B) | Sand Capacity: 16 cu. ft. | |
| Options: Vapor Clarkson Boiler (Model OK4625): 1200 lbs/hr (and Model OK4616: 1200/lbs/hr for F9B) | ||
| - | ||
 | ||
| - | Artwork by: Jean-Denis Bachand | |
| - | ||
|
Reference Sources:
| ||